Arduino Laser Sensor 20Hz For Motion Distance Or Diy
- Arduino Laser Sensor, a 1mm precision laser distance measurement module, is a device utilized for measuring target distances and transmitting data. It employs visible laser technology to emit laser beams and receive reflected laser signals to measure the distance between objects and the sensor. The laser ranging sensor supports communication interfaces such as USB, TTL, RS232, RS485, Bluetooth, enabling data transmission and communication with other devices.
- 1.Meskernel module responds quickly with high accuracy and long range measuring
- 2. We have been stand in this laser line for over 20 years, leading supplier of laser distance meter/sensor modules in China
- 3. 30m, 40m, 60m, 80m, 100m, 120m, 150m, each distance can be multifunctional
- 4. Voltage can be changed by power converter LDO
- 5. Operating temperature -10 ℃~50 ℃ can be customized
- 6. Analog can be customized.
Arduino Laser Sensor Key Features:
- 넓은 거리 옵션
선택 가능한 거리의 범위가 넓어 다양한 용도에 적합합니다. - 빠른 응답 속도
빠른 데이터 수집 기능으로 밀리초 이내에 거리 측정을 완료합니다. - 다양한 통신 인터페이스
RS232, RS485, 블루투스, 모드버스, UART 등 다양한 통신 인터페이스 및 프로토콜을 지원하여 기존 제어 또는 데이터와의 통합을 용이하게 합니다. - 높은 측정 정밀도
일반적으로 밀리미터 범위의 정밀도를 갖춘 이 센서는 측지 및 건설 엔지니어링 시나리오와 같은 애플리케이션의 높은 정확도 요구 사항을 충족합니다. - 안정적인 성능
이 센서는 좁은 범위의 데이터 변동을 유지하며 반복 오차가 매우 낮습니다. - 비접촉식 측정
이 센서는 비접촉 측정이 가능하여 움직이는 물체, 고온 또는 저온 물체, 액체 및 불규칙한 모양의 물체를 감지하는 데 적합합니다.
Using a laser sensor with an Arduino can be a great way to detect distances, measure position, or detect objects. Typically, laser sensors used with Arduino can be either laser rangefinders (for measuring distance) or laser detectors (to detect the presence of a laser spot). Below, I will walk you through the general setup for laser sensors, specifically focusing on how to interface a laser distance sensor with an Arduino, as this is one of the most common use cases.
How to use Arduino Laser Sensor?
1. Laser Distance Sensor (e.g., Lidar, LDJ Laser Sensor)
One popular laser-based sensor for distance measurement is the LDJ Laser Sensor Time-of-Flight (ToF) sensor. This is a compact and inexpensive sensor that uses laser light to measure the distance to an object.
Components Needed:
- Arduino board (e.g., Uno, Mega, Nano)
- LDJ Laser Sensor module
- Jumper wires
- Breadboard (optional)
Wiring the LDJ Laser Sensor:
The LDJ Laser Sensor communicates with the Arduino using the I2C protocol, which means you’ll need to connect the sensor to the SCL and SDA pins on your Arduino.
For an Arduino Uno:
- GND (sensor) to GND (Arduino)
- VCC (sensor) to 5V (Arduino)
- SDA (sensor) to A4 (Arduino Uno)
- SCL (sensor) to A5 (Arduino Uno)
If you are using a different Arduino model, check the I2C pins (SCL/SDA) for that board.
Test Software Platform For Arduino Laser Sensor
Why Choose Us?
As a trusted OEM manufacturer, we specialize in providing high-quality industrial laser sensors with custom solutions to meet your specific requirements. Our customization options allow you to tailor sensor configurations to your operational needs, while our OEM pricing ensures competitive cost solutions for both large-scale and small businesses. Our team of experts will work closely with you from consultation to post-installation, ensuring your industrial laser sensor system is optimized for your unique needs.
